| 
 
   |  | H.M.S. Communications, Inc.ICOM IC-F4GT/GS* SpecificationsGENERAL 
  Frequency range
    
      IC-F3GT/GS
        
          136 -150 MHz
          146 - 174 MHzIC-F4GT/GS
        
          400 - 430 MHz
          440 - 470 MHz
          470 - 500 MHz
          490 - 512 MHz (USA)
          490 - 530 MHz (others)Number of channels: Total 40
  Type of Emission:
    
      6K0F3E (25 kHz; not available in the U.S.A.)
      8K50F3E (12.5 kHz)
      14K0F3E (20 kHz; not available in the U.S.A.)Antenna impedance: 50 Ohms
  Frequency error:
    
      ± 0.0005% (EIA; IC-F3GT)
      ± 0.00025% (EIA; IC-F4GT)
      ± 1.5 kHz (ETS; 12.5kHz)
      ± 2 kHz (ETS; 25/20 kHz)PLL channel step: 5 kHz, 6.25 kHz, 7.5 kHz
  Power supply requirement: 7.2 V DC (Icom battery pack)
  Current drain (at 7.2 V DC)
    
      Transmit:
        
          at 5 W 1.6 A (IC-F3GT/GS)
          at 4 W 1.5 A (IC-F4GT/GS)
          at 1 W 0.7 A (IC-F3GT/GS), 0.8 A (IC-F4GT/GS)Receive:
        
          at AF max.  250 mA
          at stand-by 70mAOperating temperature range:
    
      -30°C to +60°C; -22°F to +140°F (EIA)
      -25°C to +55°C (ETS)Dimensions (projections not included):
    
      54(W) x 132(H) x 35(D) mm
      2-1/8(W) x 5-3/16(H) x 1-7/16 (D) inWeight (with BP-209): 370 g; 13.1 oz TRANSMITTER 
  Modulation System: Variable reactance frequency modulation
  Output power: (at 9.6 V DC)
    
      IC-F3GT/GS 5.0 W
      IC-F4GS/GT 4.0 WMax. frequency deviation: ±2.5 kHz, ±5 kHz, ±4 kHz
  Modulation limiting: 80-100%
  Audio harmonic distortion
    
      3% max. (1 kHz/40% dev.)
      5% max. (1 kHz/60% dev.)Spurious emissions:
    
      73 dBc (EIA)
      Less than 0.25 µW (ETS)Adjacent channel power:
    
      60 dB (EIA)
      60 dB (ETS; 12.5 kHz)
      70 dB (ETS; 25/20 kHz)Residual modulation:
    
      40 dB (EIA)
      43 dB (ETS; 12.5 kHz)
      45 dB (ETS; 25/20 kHz)External mic. connector:
    
      3-conductor 2.5 (d) mm (1/10")
      2.2 k Ohms RECEIVER  
  Intermediate frequency
    
      1st 31.05 MHz(IC-F3GT/GS)46.35 MHz (IC-F4GT/GS)
2nd 450 kHzSensitivity
    
      IC-F3GT/GS 0.25 µV (at 12 dB SINAD)
      0.63 µV (at 20 dB SINAD)
      IC-F4GT/GS 0.30 µV (at 12 dB SINAD)
      0.79 µV (at 20 dB SINAD)Squelch sensitivity (at threshold)
    
      IC-F3GT/GS 0.25 µV
      IC-F4GT/GS 0.30 µVAdjacent channel selectivity:
    
      65 dB (EIA)
      60 dB (ETS; 12.5 kHz)
      70 dB (ETS; 25/20 kHz)Spurious response rejection:
    
  Intermodulation rejection:
    
  Hum and noise ratio:
    
      40 dB (EIA)
      43 dB (ETS; 12.5 kHz)
      45 dB (ETS; 25/20 kHz)Audio output power: 0.5 W at 5% distortion with an 8 Ohm
    load
  External speaker connector: 2-conductor 3.5 (d) mm
    (1/8")/8 Ohm Measurements made in accordance with EIA/TIA-152-C, 204D, 603
or ETS-300-086 or CEPT T/R 24. OPTIONS 
  BC-119 DESKTOP CHARGER + AD-94 CHARGER ADAPTER For rapid
    charging of battery packs, BP-209 or BP-210. An AC adapter is supplied with
    the charger. Charging time: 1.5 to 2 hrs.
  BC-121 MULTI-CHARGER + AD-94 CHARGER ADAPTER + BC124 AC
    ADAPTER For rapid charging up to 6 battery packs simultaneously, BP-209 or
    BP-210. Six AD-94's are necessary. The BC-124 outputs 12 V DC and has 7 A
    capacity for the BC-121. Charging time: 1.5 to 2 hrs.
  BC-137 BATTERY CHARGER Regularly charges a battery pack,
    BP-209 or BP-210, with/without transceiver. The AC adapter, BC-122 is
    additionally required.
  BP-208 BATTERY CASE Battery case for AA(R6) x 6 batteries.
  BP-209 BATTERY PACKS Ni-Cd, 7.2 V/1100 mAh
  BP-210 BATTERY PACKS Ni-Mh, 7.2 V/1650 mAh
  HM-46L SPEAKER-MICROPHONE Slim dimensions. Equipped with an
    earphone jack and a transmit indicator.
  HM-75A SPEAKER-MICROPHONE Allows you to remotely select
    operating channels, etc.
  HS-51 HEADSET For hands-free operation. Includes VOX, PTT
    and "one-touch" PTT with a time-out timer.
  MB-68 BELT CLIP Allows you to attach the transceiver to
    your belt. The same as that supplied with the transceiver.
  SP-13 EARPHONE Provides clear audio in noisy environments.
  UT-96 5-TONE UNIT Provides either the 2/5-tone
    encode/decode and ANI capabilities.
  UT-105 SmarTrunk II™ Provides SmarTrunk II™
    capabilities. SmarTrunk is a trademark of SmarTrunk System Inc.
  UT-108 DTMF DECODER Provides DTMF decode and ANI
    capabilities.
  UT-109 Voice Scrambler Unit Provides operating security. Up
    to 32 scrambling codes are available. The scrambling system is not
    compatible with the UT-110, therefore cannot operate with the scrambled
    signals by UT-110.
  UT-110 Voice Scrambler Unit Provides higher operating
    security. Up to 1020 (255 codes x 4 groups) scrambling codes are available.
    The scrambling system is not compatible with the UT-109, therefore cannot
    operate with the scrambled signals by UT-109.
  UT-111 Trunking Unit Provides LTR® trunking capabilites.
  UT-113 Allows man down function. *Note: certain versions of this radio are still pending FCC
approval. Not all versions of this radio may be sold or leased until approval of
the FCC has been obtained. Please check with your authorized ICOM dealer for
details.  
 The ICOM logo is a registered trademark of
ICOM, Inc. All ICOM radios significantly exceed FCC regulations limiting
spurious emissions. All stated specifications are subject to change without
notice or obligation. |